Apartment research · Elite Cap Cana
Compare the seven Elite Cap Cana floor plans
The useful comparison is not simply which apartment has the largest total. Separate interior and outdoor areas, then compare bedroom count, bathroom count and the actual distribution on the illustrative plan. The figures below come from the model catalogue already shown on this website.
Compare models in m² and square feet
| Model | Beds / baths | Interior m² | Total m² | Total ≈ sq ft |
|---|---|---|---|---|
| A-104One-bedroom apartment | 1 / 2 | 65.37 | 124.48 | 1,340 |
| B-104One-bedroom apartment | 1 / 2 | 68.11 | 180.38 | 1,942 |
| B-204 / B-304 / B-404 / B-504One-bedroom apartment | 1 / 2 | 68.11 | 100.78 | 1,085 |
| B-312 / B-412 / B-512One-bedroom apartment | 1 / 2 | 74.39 | 123.39 | 1,328 |
| A-106Two-bedroom apartment | 2 / 2.5 | 106.86 | 224.33 | 2,415 |
| B-601Double-height loft | 2 / 2.5 | 109.87 | 155.39 | 1,673 |
| A-502Penthouse | 2 / 2.5 | 106.86 | 223.45 | 2,405 |
Original areas are in m². Approximate square-foot equivalents use 1 m² = 10.7639104 sq ft and are rounded to the nearest whole square foot. These conversions are reading aids, not replacement technical specifications. Model references grouped on one sheet share that illustrated layout; the table does not establish current availability.
A total is not an interior-only measurement
A-104 and B-104 are both one-bedroom examples, but their published totals include different garden and terrace areas. B-204 and B-312 groups use a balcony rather than the same outdoor arrangement. Looking only at the total obscures that distinction.
The full model disclosures on the Apartments page preserve the named components of each total. Open those disclosures and inspect the original diagram before making a shortlist. Two original specifications have a 0.01 m² rounding difference; their printed totals are preserved.
One category can include different illustrated models. The values of A-106, B-601 or A-502 should not be applied to every two-bedroom apartment, loft or penthouse in the project.
Questions to take to the team
Architectural renders remain illustrative and details are subject to change. The comparison does not establish a particular view, furnishings or availability. Use the enquiry link on a specific model to identify it in your message.
- Which specific apartment currently matches this illustrated model?
- Which model revision and area breakdown apply to that apartment?
- What current material documents its position and outlook?
- What information is available about its outdoor space and any model-specific conditions?
- What current written commercial information should I review next?
Questions and answers
How do I convert the model areas from m² to square feet?
Multiply the area in m² by 10.7639104. The table rounds the result to the nearest whole square foot. Keep the original m² figure and distinguish interior area from the overall total.
Do the model totals apply to every apartment of the same type?
No. Areas and specifications are specific to the named illustrative model. Ask the team for current information about the particular apartment under consideration.
Make your enquiry specific
Share the models and questions you want to discuss. Your message is editable before you send it.
Continue your research
- Compare a double-height loft and a penthouse
- What belongs to Elite, and what belongs to Cap Cana?
- Prepare a focused visit to Elite Cap Cana
This guide uses the website’s reviewed project information and illustrative model catalogue. Current availability and commercial terms must be confirmed with Elite. Destination and travel links are official sources whose information may change.